With the built-in USB-A socket, the NanoVNA-F V2 can also serve as a power source (powerbank function) with 5V/1A.Īn HF network analyser should not be missing from any measuring station, regardless of whether you are dealing with radios or antennas. 2A, depending on the power supply unit (not included). The battery is charged via a USB-C socket with max. The NanoVNA-F V2 has a built-in 5000 mAh battery. This is more than sufficient to perform the usual tests such as SWR, impedance etc. The dynamic range for reflection measurements (S11) is 70 dB or better up to 1.5 GHz and 60 dB or better in the range from 1.5 to 3 GHz. The maximum output power depends on the frequency and is between -14 and -9dBm. measurement of impedance, SWR, attenuation, matching, cable length and much more. This allows reflection and transmission measurements, i.e. Two SMA sockets are available for measuring the S-parameters S11 and S21. The analyser uses a robust aluminium housing, the 4.3" IPS LC display (800 x 480 px) offers a wider viewing angle and better brightness, which improves readability even in bright sunlight. The NanoVNA-F V2 is a continued development of the well-known NanoVNA analyser.
Stationary, directional antennas (Yagi, X-Quad).Measures: S-parameter, VSWR, smith chart, phase, ploar, etc.Calibration result interpolating supported.Aluminium enclosure: 125mm x 75mm x 20mm.Operation via touch screen or 3 side buttons.NanoVAN-F V2 can work continuous for 7 hours due to the large capacity battery and low-power design.
The S21 dynamic range is greater than 70dB at 50kHz-1.5GHz and greater than 60dB at 1.5GHz – 3GHz. The measurement frequency range of NanoVNA-F V2 is up to 3GHz. It is a product based on edy555’s NanoVNA and OwOComm’s S-A-A-V2. NanoVNA-F_V2 is a new generation of portable, stand-alone vector network analyser with 4.3″ IPS LCD screen, metal enclosure, 5000 mAh battery and SMA connectors.